Description

An impact- and heat- resistant, UV-stabilized epoxy finish perfect for flood coats. Best applied over a base coat of R-Epoxy.

​

Simple preparation

Prior to applying R-Protect, sand all surfaces (including sides and bottom) with 120-grit abrasive for good adhesion, allow any airborne dust to settle, and clean the surface so it's free of dust.

​

For thin layers

R-Protect must be applied in thin layers otherwise micro bubbles will be produced. Bubbles in thin coats can be released with a torch.

​

Fast-drying

After mixing for 3-4 minutes, the product must be applied within 10 minutes. The short working time minimizes the chances that airborne contaminants such as dust or bugs can settle into the finish.

​

Wait at least 10 days before using the surface.