ZOOMBEE SPECIALTY WOOD PRODUCTS

T&G Catalog — 2026 Edition

Crafted with care to ensure top quality.

Granum, Alberta, Canada

 

Table of Contents

 

Section 1 — About Zoombee Specialty Wood Products

Company Overview  •  Mission Statement  •  Core Markets Served

Section 2 — Manufacturing Quality

Standards & QC  •  Molder Equipment  •  Kiln Drying & Capacity  •  Species Selection

Section 3 — Tongue & Groove (T&G) Profiles

3.1 Standard T&G Profiles

3.2 V-Groove Profiles

3.3 Shiplap Profiles

3.4 Custom Profiles Available on Request

Section 4 — Ordering, Pricing & Lead Times

Pricing Units  •  Volume Discounts  •  Lead Times  •  Minimums

Section 5 — Contact & Customer Support

Sales  •  Custom Quotes  •  Delivery & Shipping

 

SECTION 1

About Zoombee Specialty Wood Products

Company Overview

Zoombee Specialty Wood Products is a specialty wood manufacturer based in Granum, Alberta, producing high-quality finished wood products for the construction and renovation trades. Zoombee's product line centres on tongue and groove profiles, shiplap, and V-groove paneling — precision-milled from kiln-dried softwood stock, sourced from the BC Kootenays, in the species our customers demand.

Zoombee is built on a small number of non-negotiable commitments: quality finish, accurate profiles, consistent moisture content, and the ability to produce in long lengths that larger commodity mills cannot reliably supply. These advantages make Zoombee the preferred source for contractors, custom home builders, cabin builders, and timber frame builders across Western Canada who need product they can count on.

Mission Statement

 

"Quality is not a feature at Zoombee — it is the foundation. Every board we produce is held to the same standard: correct moisture content, accurate profile, smooth finish, clean edges, and contractor-ready packaging. We believe that a supplier who gets these basics right, every time, is more valuable than any price list. Our goal is to be that supplier for every customer we serve."

 

Our History

Zoombee was established in Cranbrook, BC and has now expanded our manufacturing to Granum, Alberta with a clear focus: produce superior finished wood products for the trades, from a facility built for precision and efficiency. From the beginning, the company has prioritized long length production, consistent quality, and the kind of custom profile capability that keeps contractors coming back. That focus has built lasting relationships across Western Canada and continues to drive Zoombee's growth.

Core Markets Served

• Custom Home Builders: Builders finishing high-end residential interiors who demand premium appearance and consistent profile across long runs.

• Renovation Contractors: Professionals matching existing profiles or specifying new T&G paneling for interior wall and ceiling work.

• Cabin Builders: Builders and owners seeking quality softwood T&G for interior finishing of cabins, chalets, and recreational properties.

• Timber Frame Builders: Structural timber frame contractors requiring quality T&G ceiling and wall paneling to complement their frame work.

• High-End Finishing Contractors: Specialty interior finishing contractors who specify appearance-grade T&G for premium residential and small commercial interiors.

• Outdoor Structure Builders: Contractors building covered outdoor spaces, saunas, and interior-finished outbuildings where Cedar and Larch T&G is specified.

• Small Commercial Builders: Interior contractors finishing retail, hospitality, and office spaces with appearance-grade T&G wall and ceiling paneling.

 

SECTION 2

Manufacturing Quality

Overview of Manufacturing Standards

Quality at Zoombee starts with feedstock. All T&G products are milled from kiln-dried 2×6 softwood stock — dried in-house, stabilizing the wood, before profile milling begins. From species selection through kiln drying, molding, and final inspection, every stage of production is controlled by people who understand what a finished board needs to perform. Our standard is simple: every product that ships must arrive at the job site with the right moisture content, the right profile, and a surface finish that is ready to work with.

Molder Equipment

Zoombee's molder equipment is set up and maintained for consistency across long production runs. Profile heads are inspected and dressed regularly to maintain dimensional accuracy from the first board to the last — a critical requirement when long-length production is a core part of what we do.

Operators monitor feed rates and surface quality continuously during each run. Any board that does not meet our finish standard is pulled before it reaches the bundle.

Kiln Drying & Moisture Content Standards

Zoombee operates a conventional kiln dedicated to drying the 2×6 softwood feedstock used in all finished T&G products. The kiln is loaded in 16-foot lengths — the length that defines Zoombee's long-length capability — with 8 packages per charge at 42 boards per package, for a total of 336 boards per charge. Standard turnaround is 5 days per charge.

Species dried: Douglas Fir, Pine, Cedar, Larch.

Moisture content is verified by non-intrusive measurement taken by batch at the end of each kiln cycle. Product that does not reach target moisture content is returned to the kiln rather than being released for milling. Moisture content targets are maintained separately for interior and exterior applications — refer to Zoombee product specification sheets for confirmed target ranges by application and species.

Species Selection Standards

Zoombee produces T&G profiles in four core softwood species, each selected for specific performance characteristics and customer demand:

• Douglas Fir: Strong, stable, and consistent.  Accepts stain well, and is well-suited to applications where a tight, even grain is preferred.  Is not well suited for white wash or painting as the wood has tannins that will turn the finish pink.

• Pine: The most versatile species in the line. It clear coats well with a light finished product. Excellent white wash, priming and painting.  Some stains look very nice with pine.

• Cedar: Naturally durable and aromatic. The preferred species for saunas, covered outdoor structures, and anywhere moisture resistance and appearance matter.

• Larch: Dense, hard, and durable for a softwood. Excellent for high-traffic paneling applications and valued for its warm, distinct grain character.

Species availability may vary by season and production cycle. Contact Zoombee for current availability by species.

 

SECTION 3

Tongue & Groove (T&G) Profiles

Tongue and groove profiles are Zoombee's signature product line. Our T&G boards are precision-milled to ensure tight, consistent fits during installation, with smooth surfaces ready for finishing and profiles that remain stable in service. Whether you are paneling a ceiling or finishing a feature wall, Zoombee's T&G offering provides the profile, species, and surface quality you need.

 

SECTION 3.1

Standard T&G Profiles

Zoombee's standard tongue and groove boards are the workhorses of our T&G line. Milled to tight dimensional tolerances, these boards deliver consistent tongue and groove fit, smooth or textured surfaces, and reliable performance across interior wall paneling and ceiling plank applications.

Applications

• Interior wall paneling (horizontal and vertical installation)

• Ceiling plank applications

• Mudroom and utility room wall paneling

• Sauna and steam room applications (Cedar)

 

Long Lengths — A Zoombee Advantage

Zoombee's kiln is loaded and operated in 16-foot lengths, which means long-length T&G boards are a standard part of production — not a special order. Fewer joints mean faster installation and a cleaner finished result. Contractors who build in long bays, vault ceilings, or large open-plan spaces will find Zoombee's long-length capability a meaningful advantage.

 

Available Widths & Species

Available in Douglas Fir, Pine, Cedar, and Larch. 4”, 6” and 8” available in most species. With wider widths, the mill stock is from larger trees resulting in larger knots.  4” and 6” is by far the most common. 

Standard Options & Features

• Finish Options: Rough-sawn texture or smooth-planed face.

• Thickness: thickness is typically 5/8” on pine, fir or larch and 11/16” on cedar.

• Standard Lengths: 8', 10', 12', 16'

 

SECTION 3.2

V-Groove Profiles

V-groove tongue and groove boards are a popular choice wherever a decorative, defined reveal between boards is desired. The chamfered edges on each board create a crisp "V" shadow line at every joint when boards are installed, adding visual dimension and elegance to wall and ceiling applications. V-groove is widely used in interior design for accent walls, full-room paneling, and ceiling installations where a refined, architectural look is sought.

Available in Douglas Fir, Pine, Cedar, and Larch.

All V-groove boards are smooth-planed on the face as standard but can be a custom Rough-sawn face

 

SECTION 3.3

Shiplap Profiles

Shiplap is a time-tested board profile defined by rabbeted (notched) edges that allow boards to overlap slightly during installation. The result is a tight, flat-faced panel surface with a consistent, clean shadow line reveal between courses. Shiplap's enduring popularity spans both classic and contemporary design trends, from rustic farmhouse interiors to modern Scandinavian-influenced spaces.  The lap joint requires face nailing but is available.  More common is the T&G shiplaps that allow for tongue nailing to hide the brads. 

Applications

• Interior feature walls and full-room paneling

• Ceiling plank installations

• Mudrooms, entryways, and utility spaces

• Retail and hospitality interior finishes

Available Widths, Thickness & Species

Available in Douglas Fir, Pine, Cedar, and Larch. Thickness is typically 5/8” on pine, fir or larch and 11/16” on cedar.

Reveal

Reveal on Pine, fir and larch is wither 3” or 5” for the industry standard 4” and 6” materials.  Custom widths are available.

Finish Options

• Smooth-Planed Face: Standard face finish on all species; ideal for painted or stained interior applications.

• Rough-Sawn Texture: Available providing for a rustic, textured aesthetic. This is done as a special request.

 

SECTION 3.4

Custom Profiles Available on Request

Zoombee's in-house milling capability extends well beyond our standard catalog profiles. Contractors and builders are encouraged to bring their custom profile requirements to Zoombee for production. Our millwork team has the equipment, tooling capability, and experience to produce virtually any tongue and groove or shiplap profile to your exact specifications.  Please contact us to discuss your needs.

To Request a Custom Profile Quote

Contact Zoombee's custom millwork team with your profile drawing, species preference, estimated volume, and required delivery date. We will respond with a quotation including tooling requirements, unit pricing, minimum quantities, and confirmed lead time.

 

 

SECTION 4

Ordering, Pricing & Lead Times

How Products Are Priced & Sold

Zoombee T&G products are sold using the unit of measure most appropriate for the product type. Understanding the unit of sale ensures accurate quoting and ordering for your project.

 

Unit of Measure

Products Sold This Way

Lineal Foot (LF)

T&G profiles, V-groove profiles, shiplap profiles

Square Foot (SF)

Available as a conversion unit for T&G and shiplap — request square foot pricing at time of order

 

Volume Discounts

Zoombee offers structured volume discounts for contractors, builders, and dealers who purchase in quantity. Volume pricing applies across most product categories and is calculated based on per-order quantity thresholds or based on annual purchase volume for established accounts.

• Volume discount tiers are available — contact our sales team for your specific tier based on order size and product type.

• Dealer and reseller programs available — inquire with our sales team.

Standard Lead Times

 

Order Type

Typical Lead Time

Notes

Standard In-Stock Items

3–5 business days

Standard T&G, V-groove, and shiplap profiles in stock

Special Order / Non-Stock Species

1–3 weeks

Subject to supplier availability

Custom Profile Runs (Standard Tooling)

2–4 weeks

Profile confirmed; tooling already in library

Custom Profile Runs (New Tooling Required)

3–6 weeks

Tooling fabrication lead time included

Large Volume / Project Runs

Quote-specific

Dependent on scheduling and species volume

 

Minimum Order Quantities

• Standard in-stock T&G products: no minimum order quantity.

• Custom T&G profile runs: minimum quantities confirmed at quoting stage (varies by profile complexity, species and tooling requirements).

Pricing Policy

All pricing at Zoombee Specialty Wood Products is subject to change based on lumber market conditions, species availability, and input costs. Published price lists are updated periodically. Customers are encouraged to contact Zoombee for current pricing at the time of project planning and ordering. Confirmed purchase orders are subject to pricing as quoted in writing at the time of order confirmation.

 

 

Important — Market Pricing

Lumber commodity prices fluctuate with market conditions. For large project orders, we strongly recommend requesting a written quotation in advance to lock pricing for your project scope. Contact our sales team to discuss project pricing and scheduling.

 

 

SECTION 5

Contact & Customer Support

Zoombee Specialty Wood Products is committed to providing responsive, knowledgeable service to every customer. Whether you are placing a standard reorder, planning a large project, or exploring a custom millwork solution, our team is here to help. We invite you to reach out, visit our facility, or work with a representative to develop the right solution for your project.

 

Zoombee Specialty Wood Products

Location: Granum, Alberta, Canada

Sales Hours: Monday – Friday (inquiries responded to same business day)

Sales Inquiries: Contact our sales team for product availability, pricing, lead times, and order placement.

Custom Millwork Quotes: Submit profile drawings or project specifications via email or in person at our facility.

Delivery: Local delivery available for qualifying orders; freight shipping arranged for larger or long-distance orders. Contact us to discuss delivery options and logistics for your project.

 

 

Sales Inquiries

Our sales team is experienced in helping customers identify the right T&G products for their project, confirm specifications, arrange delivery logistics, and manage ongoing project purchasing relationships. We welcome calls, emails, and in-person visits from contractors, builders, and retail customers alike.

• Product availability and stock confirmations

• Volume and contractor pricing discussions

• Order placement and scheduling

• Project material take-offs and quantity estimates (available on request)

• Species availability and lead time confirmations

Custom Millwork & Project Quotes

For custom profile requests, specialty runs, or project-scale orders, our custom millwork team provides a complete quoting service. To initiate a custom millwork quote, please prepare and submit the following:

• Scaled profile drawing(s) in PDF or DXF format (or hard copy drawings delivered in person)

• Species preference and required finish

• Estimated quantity (lineal feet, board feet, or pieces)

• Required delivery date or project timeline

• Any special requirements (specific moisture content targets, custom lengths, packaging preferences, etc.)

Our team will review your submission and respond with a written quotation including pricing, minimum order quantities, tooling requirements if applicable, and confirmed lead time.

Visiting Our Facility

Customers are welcome and encouraged to visit the Zoombee Specialty Wood Products facility in Granum, Alberta. Our team is happy to walk you through our T&G product inventory, discuss custom profile requirements in person, and tour our milling operations (arranged in advance). In-person visits are particularly recommended for custom T&G profile consultations and large project discussions.

Delivery & Shipping

• Local Delivery: Available for qualifying order sizes within our local service area. Contact us for details on delivery minimums and scheduling.

• Freight Shipping: For customers outside our local delivery range, Zoombee can arrange freight shipping through established carriers or load your carrier of choice.

• Customer Pickup: Customers are always welcome to pick up orders directly from our facility during business hours. Please confirm your order in advance so we can have it staged and ready for your arrival.

 

Ready to Get Started?

Contact the Zoombee Specialty Wood Products sales team today to discuss your project, request a quotation, or place an order. We look forward to earning your business and supporting your project from first board to last.

 

 

Zoombee Specialty Wood Products  |  Granum, Alberta, Canada  |  T&G Catalog 2026

Crafted with care to ensure top quality.  —  All specifications subject to change without notice. Contact Zoombee for current pricing and availability.